Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Huntsville?
Spring replacement in Huntsville typically costs $160 – $305 for one torsion spring, and most doors have two that are replaced together as a matched pair, so a pair usually runs about twice that range. The number you get in writing depends on the spring size, the door weight, and how much of the assembly needs to come apart, but the estimate is free and it sets the final price. Our technicians have up to 12 years of experience, and we work on every major door and opener brand, so you’re not stuck guessing whether your system is supported.
If you’ve heard the bang from the garage and the door won’t lift, you already know why this matters. A broken spring takes a daily-use door out of service, and homeowners want a real number before anyone shows up. This guide gives you the 2026 Huntsville ranges, what moves the price, and how to tell repair from replacement.
Key Takeaways
- One torsion spring runs about $160 – $305 in Huntsville; a matched pair costs roughly double that.
- Torsion and extension springs price differently because the hardware and labor differ.
- Age, door weight, and rust all affect the final number, and the written estimate locks it in.
- High-tension springs store serious energy. This is trained-professional work.
- Estimates are free. Call (855) 632-2899. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Spring Replacement Cost Breakdown (2026)
These are typical estimated ranges for the Huntsville market in 2026. They cover parts and labor for the work described, and the written estimate confirms the final price for your specific door.
| Service | Typical Estimated Range | What It Covers |
|---|---|---|
| Torsion spring replacement (one spring) | $160 – $305 | New spring, winding and balancing, safety check |
| Torsion spring replacement (matched pair) | About twice the single range | Two matched springs replaced together |
| Spring repair (general) | $160 – $305 | Diagnosis and repair of the spring assembly |
| Cable repair | $115 – $225 | Frayed or snapped lift cables, often with a spring job |
| Roller replacement | $100 – $200 | Worn rollers that make a door noisy or stiff |
| Track realignment | $110 – $215 | Bent or shifted track brought back to true |
| Panel replacement | $225 – $450 | Damaged section swapped for a matching panel |
| Opener repair | $110 – $290 | Motor, logic board, or safety-sensor faults |
| Opener installation | $225 – $495 | New opener mounted and dialed in |
| Garage door repair (general) | $135 – $540 | Broad repair work across the door system |
| New door installation | $630 – $1,980 | Full door replacement, hardware and springs included |
Here’s the important note on springs: a single spring is one price, and a pair is a different job. Most residential doors in Huntsville carry two torsion springs, and when one breaks the other has usually lived the same life and is close behind. Replacing both at once is the standard approach, and that’s why a pair costs about twice the single range rather than the single number. If your door uses extension springs instead of torsion, the hardware is different, so the estimate reflects that.
What pushes cost up? A heavier door (insulated, double-car, or wood) needs a larger spring, and larger springs cost more. Rusted or frozen hardware takes longer to free up. Cables that frayed when the spring let go add a cable repair to the ticket. What brings it down? A clean, standard single-spring setup on a well-maintained door is the simplest version of this job, and it sits at the low end of the range.
If the spring is only part of the story, the broader Hawthorne Garage Door Repair service covers the door system as a whole, and you can see how the full picture compares on the Huntsville page. One call covers diagnosis, spring replacement, and any related repair, so you’re not chasing three different contractors for one problem.
What Affects Spring Replacement Pricing in Huntsville
Two doors on the same street can get different estimates, and it’s rarely arbitrary. These are the factors that move the number most often here.
- Spring type and count. Torsion and extension springs are different hardware with different labor. One spring versus a matched pair is the biggest single swing in the price, since a pair is roughly double the single range.
- Door weight and size. A single-car door with a light panel needs a smaller spring than an insulated double-car door. The spring has to be sized to the door, and heavier doors call for heavier springs.
- Age and condition of the hardware. Springs that have been winding and unwinding for years wear out, and rusted or seized drums, cables, and hinges take extra time to free and check. Older hardware often means a few related parts get attention at the same time.
- Related damage from the break. When a spring lets go, the door can drop, cables can fray, and a panel or track can take a hit. That turns a spring job into a spring-plus-cable or spring-plus-track repair, and the separate ranges above stack up honestly in the estimate.
- Door and opener brand. We service eight major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Matching the right spring and hardware to your specific system means the repair fits and holds, which cuts down on callbacks and mismatched parts.
- Access and setup. A clean, unobstructed garage makes the job straightforward. A packed or low-clearance space, or a door mounted in an awkward spot, adds time and can nudge the estimate.
Huntsville’s weather plays a part too. Humidity and summer heat work on steel springs, cables, and hinges over time, and a door that sits in a hot, damp garage tends to rust faster than one in a dry space. That’s one reason a spring that’s been in service for years can fail suddenly rather than gradually. If your springs are showing rust or the door feels heavy, that’s worth a look before it breaks at a bad moment.
Spring vs. Extension: Why the Price Differs
The two spring styles on Huntsville doors don’t cost the same to replace. Torsion springs sit on a shaft above the door and do the lifting through cables and drums. Extension springs stretch along the sides of the door on their own tracks. Torsion setups tend to take more careful winding and balancing, while extension springs are quicker to swap but need their own safety checks. The estimate for either falls within the $160 – $305 range for a single spring, but the exact number depends on what’s on your door and the condition of the surrounding hardware.
Not sure which you have? A quick look up tells you. If you see a horizontal shaft with coiled springs across the top of the door, that’s torsion. If you see springs running along the sides above the tracks, that’s extension. Either way, don’t wind or unwind anything yourself. High-tension springs hold enough stored energy to cause serious injury, and this is work for a trained technician with the right winding bars and the door secured. We’re glad to walk you through what we’re seeing so the repair makes sense.
Repair or Replace the Spring Assembly?
Usually you replace the spring, not repair it. A snapped spring can’t be safely re-tempered or patched, and a worn one that’s still whole is living on borrowed time. The honest call is spring replacement, and when one of a pair breaks, replacing both together is the standard move because the second is the same age and under the same load.
Sometimes the whole door is the bigger question. If the panels are rusted through, the door is out of balance no matter what spring you put on it, or the frame is failing, a new door can make more sense than pouring money into an old assembly. We’ll tell you which one actually makes sense for your door rather than push the bigger ticket. New door installation runs $630 – $1,980, and a fresh door comes with its springs and hardware set up right from the start. That’s the kind of repair-or-replace advice we’d want for our own garage.
How to Save on Spring Replacement
There’s no secret discount to chase here. The savings come from doing the right job at the right time and not paying for avoidable damage.
- Replace the pair, not just the broken one. Paying for one spring now and the second a few months later usually costs more than doing both at once, since it’s two service visits and two labor charges.
- Catch related wear early. If a technician spots a fraying cable or a worn roller during the spring job, fixing it then is cheaper than a separate visit after it fails.
- Keep the door balanced and lubricated. A door that’s been maintained runs with less strain on the springs, and less strain means they last longer.
- Ask for the free written estimate before work starts. The estimate spells out exactly what’s being replaced and the price, so there are no surprises. That’s the number that counts.
- Bundle related repairs in one visit. A spring job and a noisy roller or track issue handled together saves the cost of a second call-out on its own.
The estimate itself costs nothing. Call (855) 632-2899 and we’ll talk through what your door is doing, what it likely needs, and what it’ll run. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician out to look.
What Happens When You Call
You describe the door and what it’s doing, and we ask a few questions to understand the setup: whether it’s torsion or extension, single or double, and whether anything else is acting up. From there we book a time for a technician to come out, confirm the diagnosis, and give you the written estimate before any work begins. If it’s a spring, that’s usually a same-day fix once the right part is matched to your door. If it turns out to be a cable, a track, or an opener problem, we handle that too, so one call covers it.
We service the major brands directly, so whether you’ve got a LiftMaster or Chamberlain opener on top of a Clopay, Amarr, or Wayne Dalton door, the technician arrives knowing the system. Brand-matched service means the right parts and the right method, and fewer return trips. Your opener has a diagnosis, not just a symptom, and we treat it that way.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Huntsville?
Spring replacement in Huntsville typically runs $160 – $305 for one spring, and about twice that for a matched pair on a standard two-spring door. The final price depends on spring size, door weight, and any related repairs. Call (855) 632-2899 for an exact quote, and estimates are free.
Is it cheaper to replace one spring or both?
Replacing both springs at once is usually cheaper over time than doing one now and one later. A pair costs about twice the single range, but that’s one service visit and one labor charge instead of two. Since the second spring is the same age and under the same load, replacing both together is the standard approach. Call us for a written estimate that lays out both options plainly.
Can you fix a broken garage door spring the same day?
Yes, in most cases a broken spring is a same-day repair once a technician confirms the spring size and the door’s condition. Same-day service depends on scheduling and the parts needed for your specific door. Call (855) 632-2899. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why does a pair of springs cost more than one?
A pair costs about twice the single spring range because it’s two springs, two windings, and a balanced setup rather than one. Most residential doors carry two torsion springs, and they’re replaced together as a matched set. The written estimate shows you the breakdown before work starts. Call us to get your number.
Is it safe to replace a garage door spring myself?
No. A garage door spring holds high tension, and winding or releasing it without the right tools and training can cause serious injury. This is a job for a trained technician. Our technicians have up to 12 years of experience with torsion and extension springs, and we secure the door and use proper winding bars. If your spring has snapped, keep the door closed and call (855) 632-2899.
How much does a related cable or track repair add?
Cable repair runs a typical $115 – $225 and track realignment $110 – $215, so when a spring break takes a cable or a track with it, those ranges add to the spring cost. The estimate itemizes each part so you can see what’s being fixed and why. Call for a free estimate on your door.
For general questions about how we work, or to compare this spring job against the rest of what we handle, start with Hawthorne Garage Door Repair and the Huntsville service page. Whether your system is a LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, or Raynor, we work on your brand, and one call covers the diagnosis, the repair, and a full replacement if that’s what makes sense.
When you’re ready for a real number, call (855) 632-2899 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday, and a call outside dispatch hours is booked into the next opening. We’ll size the spring to your door, give you the written estimate upfront, and get your garage working again.
Written by the team at Hawthorne Garage Door Repair.
Pricing reflects the Huntsville market as of 2026. Hawthorne Garage Door Repair offers free estimates – call (855) 632-2899.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Katie Parker"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Brianna Mosley"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Darnell Ingram